top of page
water_home.jpg

MEKP (PX) PHTHALATE FREE

Cobalt-Octoate-21.png
table15.PNG
  • CAS No. : 1338-23-4
    EINECS/ELINCS No. : 215-661-2.

MEKP (PX) PHTHALATE FREE


Description:

Due to the relatively unstable nature of organic peroxides a loss of quality can be detected over a period of time. To minimize the loss of quality, we recommend a maximum storage temperature. (Ts max.) for each organic peroxide product.
For MEKP (PX):Ts max.= 250C
PHTHALATE FREE
When stored under the recommended storage conditions, will remain within the limit for a period of at least six months after delivery.

APPLICATIONS

  • Methyl ethyl ketone peroxide (MEKP) is used for the curing of unsaturated polyester resins in the presence of cobalt octoate accelerator at room and elevated temperatures.

  • For room temperature application it is necessary to use MEKP together with a cobalt accelerator (e.g.Accelerator).

  • This catalyst gives much faster gel time required for GRP pipe manufacturing.

SOLUBILITY

  • Slightly soluble in water and organic solvents

  • 30 KG HDPE Carboy

PACKAGING

footer-logo2.png

REQUEST INFORMATION

THERMAL STABILITY

  • Organic peroxides are thermally unstable substances, whic may undergo self-accelerating decomposition. 

  • The lowest temperature at which self-accelerating decomposition of a substance in the original packaging may occur is the Self Accelerating Decomposition Temperature (SADT). 

  • The SADT is determined on the basis of the Heat Accumulation Storage Test 

  • For Mekp (Px): 600C

  • Phthalate 

  • Freesadt

  • Emergency Temperature(Tem) : 550C

  • Keep containers tightly closed. Store and handle MEKP and handling in a dry well-ventilated place away from source of
    heat or ignition and direct sunlight.

  • Avoid contact with reducing agents (e.g.amines), acids, alkalis and heavy metal compounds (e.g.accelerators, driers and metal soaps).

Cure Characteristics

SAFETY AND HANDLING

PHYSICAL AND CHEMICAL PROPERTIES

  • Specific Gravity : 1.14 to 1.18

  • Viscosity, 200C : 24 mPa.s

SPECIFICATIONS

  • Appearance : Clear colorless liquid

  • Total active oxygen* : 8.9 – 9.1%

CHARACTERISTICS

  • Density, 200C : 1.0 – 1.02 g/cm3

  • Water content : max. 1%

bottom of page